Auto C – Z Purlin roll forming machine
1. Purlin roll forming machine line includes:
- Rolling Machine
- Auto - Uncoiler - Decoiler
- Product support table
2. C, C-Z purlin rolling machine can roll with many different sizes of products without replacing the rolling roller system, which can adjust the machine with many sizes:
+ Two sides C(30 => 100), Z (50 => 100)
+ Bottom edge C(60 => 350), Z (120 => 350)
+ Tape thickness up to 1.0 mm => 3.5 mm
3. Technology capabilities:
- Width and height are easily adjusted and fully controlled automatically by computer system.
- All you need is just enter the size and press the control button and then the machine will automatically adjust the rollers according to your requirements.
- The time during automatic roller adjustment is about 5 ~ 10 seconds without having to use your hands. After rolling, the product has a very smooth and beautiful surface.
- The machine is completely dry without using water (The quality of the batch is very good, much better than the SKD steel applied to the best machines in Vietnam today).
- No need to change the cutter.
- Can punch single and double holes with a center distance of 2 holes from 4 cm ~ 25 cm on any position on the purlin tree without changing the punching table.
- The machine is composed of the following main parts: roll discharger, rolling system, hydraulic cutter according to predetermined length, punching unit, PLC automatic control system.
C200 - Purlin roll forming machine - 1 Punching station | 2 Punching stations | 3 Punching stations
Saigon Industrial Mechanical Co., Ltd | Saigon Machine - SGM manufactures and supplies C200 - Purlin roll forming machine - 1 Punching station | 2 Punching stations | 3 Punching stations, installed in Vietnam with components imported from abroad such as Korea, Japan, Taiwan… Product C200 - Purlin roll forming machine - 1 Punching station | 2 Punching stations | 3 Punching stations, widely applied in civil and industrial constructions.
Auto - C200 | U200 - Purlin roll forming machine - 1 Punching station
C300 - Purlin roll forming machine - 1 Punching station | 2 Punching stations | 3 Punching stations
Z300 - Purlin roll forming machine - 1 Punching station | 2 Punching stations | 3 Punching stations
Saigon Industrial Mechanical Co., Ltd | Saigon Machine - SGM manufactures and supplies Z300 - Purlin roll forming machine - 1 Punching station | 2 Punching stations | 3 Punching stations, installed in Vietnam with components imported from abroad such as Korea, Japan, Taiwan… Product Z300 - Purlin roll forming machine - 1 Punching station | 2 Punching stations | 3 Punching stations make up widely applied in civil and industrial constructions.
Auto - C300 | Z300 - Purlin roll forming machine - 3 Punching stations
- Support 24/7: (+84)932.000.999
- Monday to Saturday | From 07h30 To 17h00: (+84)28.5425.7575 - (+84)28.5425.7979 - (+84)28.5425.9918 - (+84)28.5425.9928 - (+84)28.5425.8989
- Home
- Introduction
- Product
- DÂY CHUYỀN TỰ ĐỘNG HÓA
- ROLL FORMING MACHINE
- SINGLE LAYER - CIRCULARS CORRUGATED | RIBS ROOF TRAPEZOIDAL | RIBS ROOF PLAFONDS
- DOUBLE LAYER - CIRCULARS CORRUGATED | RIBS ROOF TRAPEZOIDAL | RIBS ROOF PLAFONDS
- ROLL FORMING MIX CRIMP CURVING MACHINE
- LOCK-SEAM | SEAM-LOCK - ROLL FORMING MACHINE
- KLIP-LOCK | KLIP-LOK - ROLL FORMING MACHINE
- FLOOR DECKING ROLL FORMING MACHINE
- AUTO UNCOILER - DECOILER MACHINE
- CRIMP CURVING MACHINE - VERTICAL & HORIZONTAL
- ROOF TILE | GLAZED TILE ROLL FORMING MACHINE
- AUTO C - Z PURLIN ROLL FORMING MACHINE
- PE-OPP INSULATION GLUING MACHINE
- PU ASSEMBLY LINE | PU - SANDWICH PANEL ROLL FORMING MACHINE
- WELDED TUBE MILL LINE
- SLITTING LINE
- C - V BATTEN ROLL FORMING MACHINE
- GUARD RAIL ROLL FORMING MACHINE
- TUBE BENDING MACHINE
- PRESSING CURVE ROLL FORMING MACHINE
- ACCESSORY MAKING MACHINE
- EQUIPMENT COMPONENTS - SPARE PARTS
- PALANG | CỔNG TRỤC | CẦU TRỤC | CẨU TRỤC
- Factory
- Project
- Quotation
- Customer
- Communication
- Recruitment
- Catalogue
- Contact
